A hole in your roof can lead to serious water damage, mold growth, and insect infestation. Your best bet is to contact a professional roofer to fix the problem to ensure it’s done correctly. If you’re determined to do it on your own, below are the steps you should take.

Get Set Up

Set up your ladder and make sure it’s secure. You’ll want to ensure the ground is dry and stable so the ladder won’t kick out. If you aren’t used to working on ladders or are scared of heights, you should call a professional roofing company to do the job for you. Once you have your ladder set up, take all of your materials and tools onto the roof one at a time, so you don’t overload yourself. Work slowly and pay attention to your footing. This information is provided by our team who complete roof repair in Elizabeth, NJ.

Determine The Extent of The Damage

You will need to determine how big the hole is. If it is very small, then you may be able to fix it with a patch. However, if the hole is large, then you may need to replace part of the roofing material.

Remove Debris

You will want to remove any debris from around the hole and make sure there are no nails or other sharp objects that could cause injury when you are working on your roof. It is also essential to make sure that there are no loose shingles or tiles that could fall off while you are working on your roof; they could cause injury if they fall on someone below or cause damage if they fall onto something else (such as a car).

Replace Damaged Wood

Before you can patch the roof, you’ll need to cut out and replace the damaged wood. Unless you are an experienced do-it-yourselfer, you may want to call a professional to do this task. If you’re going to do it yourself, you’ll need to use a circular saw to cut out the water-damaged plywood being careful not to damage the rafter. You will need to work with small sections at a time cutting two separate holes to avoid hitting the rafter. Again we recommend that you use a professional and don’t try doing this yourself, so you don’t damage your home or hurt yourself.

Create Framing

Create frames around the hole using pieces of plywood or other sturdy material. Make sure it is sturdy enough to hold shingles as well as tar paper and shingles.

Patch The Hole

Patch up the hole using asphalt-based tar paper, which you can purchase at a local hardware store or home improvement center.

Add Tar Paper

Patch up the hole using asphalt-based tar paper, which you can purchase at a local hardware store or home improvement center.

Affix Shingles

Affix new shingles over top of tar paper using nails or screws (asphalt-based tar paper works better than fiberglass). You can also use staples if nails or screws are not available.

Cost Of Repairing A Hole In The Roof

The cost of repairing a hole in the roof will vary depending on the size and type of damage. If you have a small hole that is only leaking water when it rains, you can fix it yourself with caulk or some other waterproofing material. The cost of this repair should be less than $50.

If you have a larger hole in your roofs, such as one caused by a fallen tree branch or storm damage, a professional contractor will need to repair it. The price range for this type of repair can be anywhere from $1,000 to $10,000, depending on the hole’s size and the difficulty of fixing it.